Tech & Quality Control
Transparent technical data. Every batch tested against international standards before shipment.
Physical Parameters
| Property | Value | Test Standard | Grade |
|---|---|---|---|
| Water Absorption | < 0.01% | ISO 10545-3 | Excellent |
| Breaking Strength | ≥ 35 MPa | ISO 10545-4 | Excellent |
| Mohs Hardness | 6-7 | Mohs Scale | Superior |
| Abrasion Resistance | Class 5 | ISO 10545-7 | Excellent |
| Chemical Resistance | Class A | ISO 10545-13 | Excellent |
| Thermal Shock | Pass | ISO 10545-9 | Pass |
| Frost Resistance | Pass | ISO 10545-12 | Pass |
| Flexural Strength | ≥ 50 MPa | EN 14411 | Superior |
Zero-Gap Joint Precision
Our precision cutting achieves near-zero gap joints when installed. Each slab undergoes dimensional accuracy checks with tolerances within +/- 0.5mm on length and width.
Surface flatness deviation is controlled within 0.3mm per meter, ensuring seamless visual continuity across large installations.
Flexural Strength Testing
Every production batch undergoes flexural strength testing, achieving values exceeding 50 MPa. This ensures our sintered stone withstands real-world structural loads.
Certifications
CE Certification
European Conformity mark for construction products sold in the EEA.
SGS Testing
Independent third-party testing for physical and chemical properties.
ISO 9001
Quality management system certification for consistent production.
AS/NZS 4660
Australian/New Zealand standard compliance for sintered stone.
Need Full Test Reports?
Contact us to receive detailed test reports for specific product lines.
Request Reports